IRIX 6.5.30 on a two-processor Origin 300

# boot conditions (recorded with the capture)
# generated: 2026-09-24T23:36-07:00 (capture written from the run's console log)
# what: IRIX 6.5.30 on the two-processor Origin 300 with the R14000
#       performance event-select fix, kept running about 28 minutes after
#       launch, about 18 of them at the login prompt. The PROM reports ALL
#       DIAGS PASSED and IRIX reaches login; the secondary-cache
#       single-bit-error warning never appears.
# machine: -M origin300 -cpu R14000 -smp 2 -m 512 via tools/origami run irix
#          --machine origin300 --no-build; option 1 typed at the PROM menu.
#          Firmware assets/firmware/6.5.30/ip35prom.payload.bin (IP35 PROM
#          6.210).
# disk:  assets/irix/6.5.30/root-diags-origin300.qcow2 (sha256
#        150cf2c125cb..., the manifest-registered disk), booted from a
#        writable reflink copy in scratch storage.
# source: QEMU 3684d90ed2 ("target/mips: keep the R14000 performance event
#         select" on 5161caff65), build-fast. The pull request carries the
#         same change rebased as 8e52cd5dc3. Origami e09edbef40.
# host: load average 120 to 160 during the run on 32 processors, with the
#       four-processor boot beside it.
# note: run irix-20260925T060806-e1ac8f.
# -----------------------------------------------------------------------------

INFO: 001c01 powering up the system.
001c01-L1> 
entering console mode  001c01 CPU0, <CTRL_T> to escape to L1
Starting PROM Boot process  


IP35 PROM SGI Version 6.210  built 02:33:51 PM Aug 26, 2004
using BaseIO nic
Testing/Initializing memory ...............     *** Swapping bank 0 with bank 2 on module 001c01 (nasid 0)
*** All other banks on the node are remapped as well.
        DONE
Copying PROM code to memory ...............             DONE
Discovering local IO ......................             DONE
Discovering NUMAlink connectivity .........
Local hub NUMAlink is down.
*** Local network link down
DONE
Found 1 objects (1 hubs, 0 routers) in 907 usec
Waiting for peers to complete discovery....             DONE
No other nodes present; becoming global master
Global master is /hw/rack/001/bay/01
Intializing any CPUless nodes..............             DONE
Checking partitioning information .........             DONE
No other nodes present; becoming partition master
Local slave entering slave loop
Loading BASEIO prom .......................             DONE

BASEIO PROM Monitor SGI Version 6.210  built 02:30:38 PM Aug 26, 2004 (BE64)
2 CPUs on 1 nodes found.

NVRAM checksum is incorrect: reinitializing.
Automatic update of PROM environment disabled
Installing PROM Device drivers ............             

enet_phy_reg     : Warning - PHY Silicon Revision Register value 0x0000
                             is not supported for IO7 by this diag!

enet_phy_reg     : Warning - unexpected Reg 1 reset value
                             exp:  0x7849
                             mask: 0xffc9
                             got:  0x9200000000007809

enet_phy_reg     : Warning - unexpected Reg 6 reset value
                             exp:  0x0004
                             mask: 0xffe4
                             got:  0x9200000000000000

enet_phy_reg     : Warning - unexpected Reg 23 reset value
                             exp:  0x0000
                             mask: 0xffff
                             got:  0x9200000000008040

enet_phy_reg     : Warning - unexpected Reg 24 reset value
                             exp:  0x0000
                             mask: 0xc77f
                             got:  0x9200000000008020
Base I/O Ethernet set to /dev/ethernet/ef0

Walking SCSI Adapter 0, (pci id 1)
1+ Device Vendor Product: QEMU QEMU HARDDISK
2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 1 device(s)


Walking SCSI Adapter 1, (pci id 1)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)

Initializing PROM Device drivers ..........             DONE
Checking hardware inventory ...............              
WARNING: hardware inventory is invalid.  Reinitializing...
Writing 3 records... DONE
Updated new configuration. Wrote 3 records.

**** System Configuration and Diagnostics Summary ****
CONFIG:
         No. of NODEs enabled    = 1
         No. of NODEs disabled   = 0
         No. of CPUs enabled     = 2
         No. of CPUs disabled    = 0
         Mem enabled             = 512 MB
         Mem disabled            = 0 MB
         No. of RTRs enabled     = 0
         No. of RTRs disabled    = 0

DIAG RESULTS:
         ALL DIAGS PASSED.
**** End System Configuration and Diagnostics Summary ****


System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option? 1


                           Starting up the system...

IRIX Release 6.5 IP35 Version 07202013 System V - 64 Bit
Copyright 1987-2006 Silicon Graphics, Inc.
All Rights Reserved.

NOTICE: pcibr_attach: /hw/module/001c01/Ibrick/xtalk/15/pci Bus holds a usb part - settingbridge PCI_RETRY_HLD to 4
Setting hub ixtt.rrsp_ps field to 0x4e20
Selecting Default Server
NOTICE: Starting failsoftd
The system is coming up.

/ns: Resource busy

Warning:  Internet Gateway web server running as root.
          Use "chkconfig webface_apache off" to disable.
ESP has already been started



IRIS console login: 
# Boot transcripts are excluded from the site content license. · raw: origin300-irix-two-processor-boot.txt